XLP150 Extreme Low Profile System

XLP150 Extreme Low Profile System

The Hydra-Slide™ XLP150 skidding system is a cost-effective, simple and safe method for moving all types of heavy loads, requiring minimal personnel and equipment for mobilization.

This system features a 1.25″ (32mm) profile, reducing jacking time and ideal for situations where overhead space or clearance is limited, such as inside buildings or within live power stations.

Engineered for both pushing and pulling 150 tons (135 tonnes)

A safer alternative to overhead lifting or rollers

No come-alongs, winch lines or holdbacks required

Completely hand-portable

System contained in a compact steel box for easy transportation

Unique ratchet track design enables automatic resetting of push cylinders

All personnel stay a safe distance from the load

Bi-directional track and skid shoes for skidding in either direction

Quick and simple lug connections – no tools required

Clean, low maintenance steel and UHMW slide surfaces

Ideal for areas with restricted access and flat, continuous support

Engineered stamped General Arrangement drawings included

XLP150 Technical Specifications

Skidding Push Capacity* 250 ton
Skidding Pull Capacity* 150 ton
Cylinder Capacity – Push 30 ton
Cylinder Capacity – Pull 15 ton
Cylinder Stroke 14.25″
Skidding Speed** 90 ft/hr
System Coefficient of Friction 15-20%
Slide Surface Material UHMW Polyethylene
Maximum Slope +/- 2%
Track Alignment Tolerance +/- 0.25″
Maximum Operating Pressure 10,000 psi

* based on standard system containing 2x push cylinders
** Speed based on 20-2-4D Hydra-Pac

XLP150 Dimensions

Length Width Height Weight
Track Section 60″ 14.75″ 1.125″ 65 lb
Slider Plate – 1′ 12″ 7.75″ 0.375″ 7.5 lb
Slider Plate – 2′ 24″ 7.75″ 0.375″ 17.5 lb
Slider Plate – 4′ 48″ 7.75″ 0.375″ 40 lb
Standard Box wth Standard XLP System 76″ 48″ 31″ 2090 lb
Contains:
12x Track Sections
8x Slider Plates
2×30 Ton Push/Pull Cylinder Assemblies
2x Push/Pull Heads
24x Track Connector Bars
Spare Parts Kit
Coupler Bleed Tool Kit

XLP150 Technical Specifications

Skidding Push Capacity* 227 tonne
Skidding Pull Capacity* 136 tonne
Cylinder Capacity – Push 27 tonne
Cylinder Capacity – Pull 13.5 tonne
Cylinder Stroke 362 mm
Skidding Speed** 28 m/hr
System Coefficient of Friction 15-20%
Slide Surface Material UHMW Polyethylene
Maximum Slope +/- 2%
Track Alignment Tolerance +/- 6 mm
Maximum Operating Pressure 700 bar

* based on standard system containing 2x push cylinders
** Speed based on 20-2-4D Hydra-Pac

XLP150 Dimensions

Length Width Height Weight
Track Section 152 cm 37 cm 2.9 cm 29 kg
Slider Plate – 1′ 30 cm 20 cm 1.0 cm 3.4 kg
Slider Plate – 2′ 61 cm 20 cm 1.0 cm 7.9 kg
Slider Plate – 4′ 122 cm 20 cm 1.0 cm 18 kg
Standard Box wth Standard XLP System 193 cm 122 cm 79 cm 948 kg
Contains:
12x Track Sections
8x Slider Plates
2×30 Ton Push/Pull Cylinder Assemblies
2x Push/Pull Heads
24x Track Connector Bars
Spare Parts Kit
Coupler Bleed Tool Kit