Hydra-Slide logo Strong, safe and simple slogan.

> Products > Power Units

Already a Client? Get Immediate Access to the most up-to-date Operating Manuals and Information about your Equipment. 


Conventional Hydraulic Power Units

These power units use a single oil supply circuit. It may be split into more than one outlet port but they are connected so act as one. Pressure remains constant in all lines but flow rates may be different.

Our Conventional Power Units are equipped with flow control valves to help control the flow rates to each push cylinder.

Model 5-1G (Gasoline)

Unit comes complete with:

  • 5.5 HP Honda 4-cycle gasoline powered engine,
  • two-stage pump (480/100 cu.in/min),
  • 10 gallon reservoir,
  • 1 manual operated Enerpac control valves,
  • 1 adjustable relief valve, 2 pressure gauges,
  • 2 Tee fittings,
  • 2 pressure port outlets with flow control valves and quick couplers
  • 2 return ports with quick couplers.
 

Model 10-1G (Gasoline)

Unit comes complete with:

  • 10 HP Briggs & Stratton electric start 4-cycle gasoline powered engine,
  • two-stage pump (900/200 cu.in/min),
  • 10 gallon reservoir,
  • 1 manual operated Enerpac control valve,
  • 1 adjustable relief valve, 2 pressure gauges,
  • 1 counterbalance valve,
  • manifold with 4 pressure port outlets with needle valves and CR400 quick couplers
  • 4 return ports with CR400 quick couplers

Worker in red coveralls and hard hat operates a conventional hydraulic power unit.

 

Model 3-1E (Electric)

Unit comes complete with:

  • 3 HP Electric Motor (208-240 Volt, 3Ph, 50-60Hz)
  • two-stage pump (850/120 cu.in/min)
  • 10-gallon reservoir
  • 1 manual operated Enerpac control valve
  • 1 adjustable relief valve
  • 2 pressure gauges
  • 2 pressure port outlets with flow control valves and CR400 quick couplers
  • 2 return ports with CR400 quick couplers
 

Model 7-1E (Electric)

Unit comes complete with:

  • 7.5 HP Electric Motor (208-240 Volt, 3Ph, 50-60Hz)
  • two-stage pump (900/200 cu.in/min)
  • 10-gallon reservoir
  • 1 manual operated Enerpac control valve
  • 1 adjustable relief valve
  • 1 pressure gauge
  • 1 counterbalance valve
  • 4 pressure port outlets with needle valves and CR400 quick couplers¬†
  • 4 return ports with CR400 quick couplers

 

Hydraulic Hoses

Our hoses are fully tested and rated as a jacking hose with maximum working pressure of 10,000 psi. They come complete with CH604 quick couplers on each end. 50 ft length (15m) is standard, with custom lengths available


Product Information Sheets (Metric)

Product Information Sheets (Imperial)


Don Mahnke, President of Hydra-Slide talking with Percy Jesso of Hydraulic Power Inc.
Hydra-Slide has a long-standing relationship with a leading edge Hydraulics supplier, Hydraulic Power. With many combined years of practical applications experience, engineering expertise, and product knowledge we design industry-renowned, superior Hydraulic systems.